NETWORK BASED ENCODER
LG-N-HVE is part of a 4K UHD Multi-Function Extension system that allows you to extend HDMI or VGA
signals along with KVM using the TCP/IP protocol over regular Cat.5e/6/7 network cable.
- HDMI 2.0, DVI 1.0, HDCP 1.4 & 2.2 compliant
- Video, audio and control transmission over TCP/IP in Unicast (point-to-point) or Multicast (single-to-many) modes
- Multi-monitor video wall support with 90° rotation
- HDMI input resolutions up to 4K@60Hz (YUV 4:2:0, 8-bit) or 4K@30Hz (YUV 4:4:4, 8-bit) Note: 4K@50/60Hz (YUV 4:2:0) sources are automatically converted to 4K@25/30Hz (RGB) for output
- Supports pass-through of audio formats including LPCM 2.0/5.1/7.1, and Bitstream over HDMI Note: The optical output on Receivers can only support LPCM 2.0 & Bitstream sources.
- The analog Line In on the Transmitter sends audio directly to the analog Line Out and is inserted into the HDMI output on connected Receivers
- The Mic In on the Receiver sends audio directly to the analog Line Out on the Transmitter
- Both Tx and Rx may powered directly by PoE when connected to a Gigabit Ethernet switch that provides PoE
- Supports IR and RS-232 bypass
- Unit can be controlled via WebGUI, Telnet, and front panel controls
